HIGH POWER TERMINATORS
-----PCS3080P
HIGH POWER TERMINATORS
-----PCS3080P
This high power thin film terminators exhibit excellent high frequency characteristics. Installing on heat sink, can operate with higher power rating.
Mechanical -------------------------- Schematic Diagram
| Impedance | 50 ohm |
T. C. R. |
+/- 50 ppm/℃ |
VSWR |
1.2 Max. |
Max. Heat Sink Temp. （ at Max. Rated Power） |
65℃ |
Frequency Range |
DC 〜 1. 5 GHz |
||
Power Rating |
1.5 W（ Max. 80 W ） |
Op. Temp. Range |
− 55℃ 〜 ＋125℃ |
| Test Item | Test Condition |
To meet |
Short-time Overload |
Rated Voltage × 2.5, 5sec. |
+/-（0.5% ＋0.05 ohm） |
Resistance to Soldering Heat |
250℃ +/- 5℃, 10 +/- 1sec. |
+/-（0.5% ＋ 0.05 ohm） |
Solderability |
235℃ +/- 5℃, 3 +/- 0.5sec. |
More than 95% |
Temperature Cycle |
− 10℃ 30min. R. T. 3min. ＋70℃ 30min.R. T. 3min. 5cycles |
+/-（0.5% ＋ 0.05 ohm） |
Moisture Load Life |
40 +/- 2℃ 90 〜 95%, Rated voltage. 90min.ON 30min.OFF 1000H |
+/-（1.0% ＋ 0.05 ohm） |
Load Life |
40 +/- 2℃, Rated voltage. 90min.ON 30min.OFF 1000H |
+/-（1.0% ＋ 0.05 ohm） |
Insulation Resistance |
DC 500V, 1 min. |
＞ 1,000 M ohm |
---
PCS------------- 3080P--- −-- 50 ohmProduct Code -----Package Size---- Impedance